Licensed CA Contractor · #1149271

Epoxy Flooring in Sacramento Built on Real Prep

Garage and commercial epoxy floors that stay bonded, because every slab gets diamond ground before any coating goes down. Commercial caulking and waterproofing from the same licensed crew.

Capitol City Sealant installer rolling a gloss epoxy coat across a diamond-ground garage floor in the Sacramento area
Diamond-Ground PrepOn every floor we coat
One Garage, Start to Finish

From Oil-Stained Slab to Finished Floor

This is what we mean by doing it right. The same Sacramento-area garage before we started, after diamond grinding, and finished with a full-broadcast flake system.

Oil-stained bare concrete garage floor before epoxy coatingBefore
Years of oil drips and tire marks soaked into bare concrete.
Garage slab after diamond grinding, with an even open profile ready for epoxyPrep
Diamond ground to open the surface so the coating can bond.
Finished blue and gray full-broadcast flake epoxy garage floorFinished
Full-broadcast flake: durable, easy to clean, and it hides wear.
Why Epoxy Floors Fail

Most Epoxy Floors Don’t Fail. Their Prep Does.

When a garage floor peels in big sheets, or a shop floor lifts under tire tracks, the coating usually wasn’t the problem. It was rolled over smooth, dirty or oil-soaked concrete it could never properly bond to.

Store-bought kits and quick jobs often skip real surface prep. Acid etching can open up clean, new concrete, but it won’t remove old coatings, sealers or deep contamination. That’s why we diamond grind every floor we coat, with a vacuum dust extractor hooked to the grinder.

45+

Days Sacramento hit 100° or hotter in 2024, a new record. Hot tires coming off a 100° road are hard on any garage coating. Proper prep and the right system are how a floor survives a Sacramento summer.

How We Prep Concrete
Diamond floor grinder and dust extractor set up in a garage before epoxy prep
Grinder and dust extractor set up before prep on a garage job.
How It Works

Our Process, Start to Finish

No guesswork and no surprises. You’ll know what we’re doing to your floor, why we’re doing it, and when you can use it again.

See the Full Process
  1. Walk-Through & Estimate

    We look at the slab, cracks, stains and any old coating, and talk about how you use the space.

  2. Diamond Grind & Repair

    Grind the surface open, then fill cracks, joints and pits.

  3. Base Coat

    Epoxy base coat goes down over clean, profiled concrete.

  4. Flake or Color

    Broadcast flake or a solid color coat, depending on your system.

  5. Topcoat & Handoff

    Protective clear topcoat, a final walk-through, and care instructions.

Recent Work

Floors We’ve Finished

View All Projects

Where We Work

Serving Sacramento and the Surrounding Region

Capitol City Sealant is based in Elk Grove and works throughout Sacramento County, South Placer and Yolo County. If you’re not sure whether we cover your area, ask. Chances are we do.

All Service Areas

Common Questions

Do you do residential garages or just commercial floors?

Both. We coat residential garages, shops and home gyms, and we install commercial epoxy flooring for warehouses, auto shops, showrooms and other businesses. See garage epoxy floors and commercial epoxy flooring.

Are you a licensed contractor?

Yes. Capitol City Sealant holds California contractor license #1149271 in the C-61/D-12 Synthetic Products classification, which covers resin and epoxy application as well as synthetic caulking and sealants. You can verify it on the CSLB website.

How much does an epoxy floor cost?

It depends on the square footage, the condition of the slab, how much repair and prep it needs, and the coating system you choose. We price every floor after looking at it in person, and the estimate is free and in writing.

What areas do you serve?

We work throughout the Sacramento region, including Sacramento, Elk Grove, Roseville, West Sacramento, Rancho Cordova, Folsom, Citrus Heights and nearby cities. See the full list on our service areas page.

Can you handle caulking or waterproofing on the same building?

Yes. Along with floors, we replace failed caulking and joint sealants and handle sealant-based waterproofing on commercial buildings, so one licensed contractor can take care of the floor and the building envelope.

More questions and answers →

Capitol City Sealant logo

Ready for a Floor That Stays Put?

Tell us about your garage, shop or building. We’ll come out, look at the slab, and give you a straight answer and a written estimate.

Free Estimate