Commercial & Industrial

Commercial Epoxy Flooring in Sacramento

Seamless, cleanable epoxy floors for warehouses, auto shops, showrooms and work areas, installed over diamond-ground concrete by a licensed, certified epoxy contractor.

Where It Works

Commercial Spaces We Coat

Bare concrete gives off dust, soaks up spills and is hard to keep clean. A properly installed epoxy system seals the slab and gives your team a floor that’s easier to maintain and better looking.

Warehouses & Distribution

Dust control and a cleanable surface for storage and staging areas, with a durable system for carts and pallet traffic.

Auto Repair & Service Bays

Resists oil, coolant and brake fluid, cleans up quickly, and brightens a shop that customers walk through.

Showrooms & Retail

A seamless, high-gloss look in solid color or flake that holds up to steady foot traffic.

Light Manufacturing

A tough, sealed floor for production areas, maintenance rooms and work cells.

Gyms & Studios

Easy to sanitize and durable under equipment and constant foot traffic.

Offices, Breakrooms & Back of House

Utility rooms, corridors and storage areas that need to look professional and clean easily.

What Commercial Floors Need

A Floor Spec’d for the Work, Not the Brochure

A commercial floor has to do more than look good on day one. Before we recommend a system, we look at:

  • Traffic: foot traffic, carts, pallet jacks, vehicles or forklifts.
  • Exposure: oil, fuel, cleaning chemicals, water and heat.
  • Cleaning: how the floor will be cleaned, and how often.
  • Safety: where slip resistance needs to go into the topcoat.
  • Slab condition: cracks, joints, old coatings, contamination and signs of moisture.
  • Downtime: how long each area can be out of service.
Epoxy installer in spiked shoes rolling a gloss epoxy coat
Spiked shoes let the installer walk the wet coat to keep it even.
Our Commercial Approach

How We Run a Commercial Floor Job

Commercial work is about planning as much as installing. Here’s what you can expect from us.

Diamond grinder connected to a dust extractor for concrete floor prep
  1. Site Walk

    We walk the space with you, assess the slab and joints, and learn how the floor gets used.

  2. Written Scope & Bid

    A clear bid listing the prep, repairs and coating system, so you know exactly what you’re getting.

  3. Scheduling & Phasing

    We plan the work in sections and set timing around your operation.

  4. Mechanical Prep

    Diamond grinding with dust extraction, then crack, joint and spall repair. See our prep standards.

  5. System Install

    Base coat, color or broadcast, and a protective topcoat, with slip resistance where it’s needed.

  6. Return to Service

    Final walk-through, cure times for foot and equipment traffic, and maintenance guidance for your crew.

One Contractor, Floor to Envelope

Floors, Caulking and Waterproofing

Property managers and general contractors usually have to hire separate trades for floor coatings, joint sealants and waterproofing. Capitol City Sealant holds a California C-61/D-12 Synthetic Products license, which covers both epoxy application and synthetic caulking and sealants.

That means one licensed contractor can coat the warehouse floor, replace failed expansion joint sealant, and reseal the window perimeters on the same building.

Credentials at a Glance

  • California contractor license #1149271
  • Classification: C-61/D-12 Synthetic Products
  • Active contractor bond on file with the CSLB
  • Certified for commercial epoxy flooring, caulking and waterproofing

Verify our license anytime on the CSLB website.

Commercial Flooring Questions

Can you work around our business hours?

We plan commercial jobs around your operation. During the walk-through we’ll talk through your schedule and how to section the work so you can keep the areas you need open.

Which coating system is right for our facility?

It depends on the traffic, chemicals, cleaning methods and look you need. Forklift aisles, service bays and a retail floor each call for something different. We recommend a system after seeing the space and learning how it’s used.

Does diamond grinding create a lot of dust in an occupied building?

Our grinder runs connected to a vacuum dust extractor, which captures the dust at the source. We’ll go over containment and timing for occupied areas before we start.

Do you handle the joints and caulking too?

Yes. Floor joints and cracks are treated as part of the floor. We also replace failed caulking and sealants elsewhere on the building, including expansion joints, window and door perimeters, and tilt-up panel joints.

Capitol City Sealant logo

Get a Bid for Your Facility

Tell us the square footage, the type of space and your timeline. We’ll set up a site walk and send a written scope and bid.

Free Estimate