Waterproofing Contractor in Sacramento
Sealant-based waterproofing for commercial buildings. We seal the joints, gaps and penetrations where water gets in, so small leaks don’t turn into interior damage.
Sealant Is the First Line of Defense
Walls, glass and concrete don’t usually leak on their own. Water gets in where materials meet: around windows and doors, between panels, at pipe and conduit penetrations, and where a joint’s sealant has cracked or let go.
Our waterproofing work focuses on those weak points. We find failed or missing sealant, prep the surfaces properly, and install sealants made to stay flexible and bonded through Sacramento’s heat and winter storms.
Waterproofing Services
- Joint and perimeter sealing on exterior walls
- Window, door and storefront perimeter waterproofing
- Sealing pipe, conduit and vent penetrations
- Tilt-up and precast panel joint sealing
- Sealing transitions between dissimilar materials
- Inspection of problem areas and repair recommendations
What Water Intrusion Costs You
Water that gets past a failed joint doesn’t stay put. It stains drywall, swells finishes, rusts metal and invites mold, and by the time it shows up inside the building the damage behind the wall is usually bigger than the stain.
Resealing joints on a schedule costs far less than repairing interiors after the fact, and it keeps tenants and customers from seeing the problem.
Most waterproofing jobs go hand in hand with commercial caulking and sealant replacement, and we handle both.
Waterproofing Questions
Where do most commercial building leaks start?
Most often at joints and transitions: window and door perimeters, panel joints, penetrations for pipes, conduit and vents, and places where two different materials meet. Those are the spots sealant is meant to protect.
Can you find where a leak is coming from?
We inspect the joints, perimeters and penetrations around the leak area to find failed sealant and likely entry points, then recommend the repair. Some leaks need further investigation, and we’ll tell you if yours does.
Our Waterproofing Process
Waterproofing fails when it’s treated as a tube of caulk and a ladder. We treat it as a building problem: find out where the water is getting in, then fix the joint so it stays sealed through years of movement and weather.
Built for the Sacramento Valley: exterior sealant here has to handle long stretches of triple-digit summer heat and strong sun, then winter storms. Joints expand and contract with every swing. A sealant chosen and installed for that movement lasts. One that isn’t will crack and let go.
Inspect
Look at joints, perimeters, penetrations and transitions around the problem area and across the elevation.
Identify Entry Points
Pinpoint failed, missing or poorly detailed sealant and note any substrate damage.
Remove & Prep
Cut out failed sealant, then clean and prime the surfaces.
Seal
Install backer rod and a sealant suited to the joint’s movement, materials and sun exposure.
Review
Walk the completed work with you and note any areas to watch.
Have a Leak or Failing Joints?
Send photos of the problem area and a little about the building. We’ll take a look and recommend a fix.