West Sacramento, CA

Epoxy Flooring in West Sacramento, CA

Warehouse and industrial epoxy floors for Southport and Port North, plus residential garage floors across West Sacramento.

Yolo County

Industrial Floors Across the River

West Sacramento is one of the region’s busiest warehouse and distribution markets. The Southport industrial area has filled up with large modern distribution buildings, while Port North and the areas around the Port of West Sacramento have older industrial buildings, many dating to the 1970s and ’80s.

Those older buildings often have the toughest floors to coat: decades of oil, worn-out coatings, cracks and patched slabs. That’s where thorough mechanical prep matters most.

Diamond-ground concrete slab ready for epoxy coating

Warehouse and Industrial Epoxy Floors

Bare concrete in a warehouse sheds dust onto product and equipment and soaks up every spill. A properly installed epoxy system seals the slab, makes the floor easier to clean, and brightens the space.

  • Grinding off old, failing coatings in older buildings
  • Crack, joint and spall repair before coating
  • Systems chosen for cart, pallet and vehicle traffic
  • Joint sealant replacement on tilt-up buildings

See commercial epoxy flooring and commercial caulking and sealants.

West Sacramento Garage Floors

We also coat residential garages in Southport, Bryte, Broderick and the rest of West Sacramento, with the same diamond-ground prep and full-broadcast flake systems we install everywhere else. See garage epoxy flooring.

Why Older Industrial Slabs Need More Prep

A 40-year-old warehouse slab has usually been through several tenants, so it may carry old paint or epoxy, sealers, oil saturation, patched cracks and worn joints. Coating over that is how floors fail in months instead of years.

  • Old coatings are ground off to sound concrete instead of being coated over.
  • Oil-soaked areas are cleaned and treated so they don’t keep bleeding into the new system.
  • Cracks and spalls are filled and leveled so forklift and cart wheels roll smoothly.
  • Signs of moisture in slab-on-grade concrete are flagged during the walk-through, before any coating is chosen.

Newer Southport buildings are often in better shape, but a new slab still needs to be ground to remove the smooth top layer and any curing compounds before it can be coated.

West Sacramento Epoxy Floor Questions

Can you coat over the old floor coating in our warehouse?

If the existing coating is failing, we grind it off to sound concrete first. Coating over a failing floor only buries the problem.

Do you also seal tilt-up panel joints?

Yes. Panel joints and expansion joints on tilt-up buildings are part of our commercial caulking and sealant work.

Capitol City Sealant logo

Serving West Sacramento Homes and Businesses

Tell us about your garage or building and we’ll set up a time to look at it.

Free Estimate