Flake & Solid Color Epoxy Floor Systems
Two proven looks, both built as multi-coat systems over diamond-ground concrete. We’ll help you pick the one that fits how your floor gets used.

Full-Broadcast Flake Floors
A flake floor starts with a pigmented epoxy base coat. While it’s wet, colored vinyl flake is broadcast across the floor until it’s completely covered. Once it cures, the loose flake is scraped and vacuumed off, and a clear topcoat locks everything in.
- Hides slab imperfections, old stains and everyday dirt
- Light texture for better grip than a smooth coat
- Wide range of blends, from cool grays and blues to warm tans
- The go-to choice for garage floors, shops and showrooms
Solid Color Epoxy Floors
A solid color system is a pigmented epoxy built up over the prepared slab and finished with a protective topcoat. It gives a seamless, uniform look that brightens a space and makes spills easy to spot and clean.
- Clean, modern look for commercial spaces, workshops and utility areas
- Reflective surface that brightens interiors
- Slip-resistant texture can be added to the topcoat
- Works well for defined work zones and walkways

Which System Fits Your Floor?
| Consideration | Full-Broadcast Flake | Solid Color |
|---|---|---|
| Look | Speckled, stone-like texture | Seamless, uniform color |
| Hides dirt & imperfections | Very well | Shows more, but spills are easy to spot |
| Grip | Natural light texture | Smooth unless texture is added |
| Common uses | Garages, showrooms, gyms, shops | Commercial work areas, utility rooms, walkways |
Every system starts the same way: diamond-ground prep and crack repair. The finish is what you see. The prep is what keeps it on the floor.
Anatomy of an Epoxy Floor System
A professional epoxy floor is built in layers, and each one has a job. Skip one or rush it, and the whole floor is weaker.
That’s the real difference between a system and a single coat of “epoxy paint.” Store-bought products go on as one thin film. A system builds thickness and protection in stages, starting from concrete that has been ground open so the first layer can lock in.
Prepared Concrete
Diamond ground, cleaned and repaired. This is the foundation everything else bonds to.
Base Coat
A pigmented epoxy that soaks into the open profile and builds the body of the floor.
Flake or Color Build
Broadcast flake for a decorative, textured finish, or a color coat for a uniform solid look.
Protective Topcoat
The wear layer. It takes the abrasion, seals the flake, gives the floor its sheen, and can carry slip-resistant texture.
Choosing Colors and Finish
Flake blends range from cool grays and blue-grays that look clean next to white or charcoal walls, to warm tans and browns that hide dust and match earth-tone homes. Solid colors in gray and other neutrals are the go-to for work areas.
Lighting changes everything, so we bring samples to your walk-through and look at them in your actual space. If the floor needs more grip, for example near an entry, on a slope, or where it gets wet, we add slip-resistant texture to the topcoat in those areas.
Still deciding? Our project gallery shows finished floors in two different flake blends.

Not Sure Which Finish You Want?
We’ll bring samples to your walk-through so you can see the colors in your own space before you decide.